LteMeas

SCPI Commands :

CONFigure:LTE:MEASurement<Instance>:BAND
CONFigure:LTE:MEASurement<Instance>:SPATh
CONFigure:LTE:MEASurement<Instance>:STYPe
CONFigure:LTE:MEASurement<Instance>:DMODe
CONFigure:LTE:MEASurement<Instance>:FSTRucture
class LteMeasCls[source]

LteMeas commands group definition. 219 total commands, 10 Subgroups, 5 group commands

get_band() → Band[source]
# SCPI: CONFigure:LTE:MEASurement<Instance>:BAND
value: enums.Band = driver.configure.lteMeas.get_band()
Selects the operating band (OB) .

INTRO_CMD_HELP: The allowed input range has dependencies:

  • FDD UL: OB1 | … | OB28 | OB30 | OB31 | OB65 | OB66 | OB68 | OB70 | … | OB74 | OB85 | OB87 | OB88

  • TDD UL: OB33 | … | OB45 | OB48 | OB50 | … | OB53 | OB250

For Signal Path = Network, use [CONFigure:]SIGNaling:LTE:CELL:RFSettings:FBINdicator.

return:

band: No help available

get_dmode() → Mode[source]
# SCPI: CONFigure:LTE:MEASurement<Instance>:DMODe
value: enums.Mode = driver.configure.lteMeas.get_dmode()

Selects the duplex mode of the LTE signal: FDD or TDD. For Signal Path = Network, use [CONFigure:]SIGNaling:LTE:CELL:RFSettings:DMODe.

return:

mode: No help available

get_fstructure() → FrameStructure[source]
# SCPI: CONFigure:LTE:MEASurement<Instance>:FSTRucture
value: enums.FrameStructure = driver.configure.lteMeas.get_fstructure()

Queries the frame structure type of the LTE signal. The value depends on the duplex mode (method RsCMPX_LteMeas.Configure. LteMeas.dmode) .

return:

frame_structure: T1: Type 1, FDD signal T2: Type 2, TDD signal

get_spath() → Path[source]
# SCPI: CONFigure:LTE:MEASurement<Instance>:SPATh
value: enums.Path = driver.configure.lteMeas.get_spath()

Selects between a standalone measurement and a measurement with coupling to signaling settings (cell settings of the network configuration) .

return:

path: No help available

get_stype() → SignalType[source]
# SCPI: CONFigure:LTE:MEASurement<Instance>:STYPe
value: enums.SignalType = driver.configure.lteMeas.get_stype()

Selects the type of the measured signal.

return:

signal_type: UL: LTE uplink signal SL: V2X sidelink signal

set_band(band: Band) → None[source]
# SCPI: CONFigure:LTE:MEASurement<Instance>:BAND
driver.configure.lteMeas.set_band(band = enums.Band.OB1)
Selects the operating band (OB) .

INTRO_CMD_HELP: The allowed input range has dependencies:

  • FDD UL: OB1 | … | OB28 | OB30 | OB31 | OB65 | OB66 | OB68 | OB70 | … | OB74 | OB85 | OB87 | OB88

  • TDD UL: OB33 | … | OB45 | OB48 | OB50 | … | OB53 | OB250

For Signal Path = Network, use [CONFigure:]SIGNaling:LTE:CELL:RFSettings:FBINdicator.

param band:

No help available

set_dmode(mode: Mode) → None[source]
# SCPI: CONFigure:LTE:MEASurement<Instance>:DMODe
driver.configure.lteMeas.set_dmode(mode = enums.Mode.FDD)

Selects the duplex mode of the LTE signal: FDD or TDD. For Signal Path = Network, use [CONFigure:]SIGNaling:LTE:CELL:RFSettings:DMODe.

param mode:

No help available

set_spath(path: Path) → None[source]
# SCPI: CONFigure:LTE:MEASurement<Instance>:SPATh
driver.configure.lteMeas.set_spath(path = enums.Path.NETWork)

Selects between a standalone measurement and a measurement with coupling to signaling settings (cell settings of the network configuration) .

param path:

No help available

set_stype(signal_type: SignalType) → None[source]
# SCPI: CONFigure:LTE:MEASurement<Instance>:STYPe
driver.configure.lteMeas.set_stype(signal_type = enums.SignalType.SL)

Selects the type of the measured signal.

param signal_type:

UL: LTE uplink signal SL: V2X sidelink signal

Cloning the Group

# Create a clone of the original group, that exists independently
group2 = driver.configure.lteMeas.clone()

Subgroups