EvMagnitude

SCPI Command :

CONFigure:LTE:MEASurement<Instance>:MEValuation:RESult:EVMagnitude
class EvMagnitudeCls[source]

EvMagnitude commands group definition. 2 total commands, 1 Subgroups, 1 group commands

get_value() → bool[source]
# SCPI: CONFigure:LTE:MEASurement<Instance>:MEValuation:RESult:EVMagnitude
value: bool = driver.configure.lteMeas.multiEval.result.evMagnitude.get_value()
Enables or disables the evaluation of results in the multi-evaluation measurement.

Table Header: Mnemonic / Description

  • EVMagnitude / Error vector magnitude

  • MERRor / Magnitude error

  • IEMissions / In-band emissions

  • ESFLatness / Equalizer spectrum flatness

  • SEMask / Spectrum emission mask

  • RBATable / Resource block allocation table

  • EVMC / EVM vs subcarrier

  • PERRor / Phase error

  • IQ / I/Q constellation diagram

  • TXM / TX meas. statistical overview

  • ACLR / Adj. channel leakage power ratio

  • PMONitor / Power monitor

  • PDYNamics / Power dynamics

For reset values, see method RsCMPX_LteMeas.Configure.LteMeas.MultiEval.Result.all.

return:

enable: OFF: Do not evaluate the results. ON: Evaluate the results.

set_value(enable: bool) → None[source]
# SCPI: CONFigure:LTE:MEASurement<Instance>:MEValuation:RESult:EVMagnitude
driver.configure.lteMeas.multiEval.result.evMagnitude.set_value(enable = False)
Enables or disables the evaluation of results in the multi-evaluation measurement.

Table Header: Mnemonic / Description

  • EVMagnitude / Error vector magnitude

  • MERRor / Magnitude error

  • IEMissions / In-band emissions

  • ESFLatness / Equalizer spectrum flatness

  • SEMask / Spectrum emission mask

  • RBATable / Resource block allocation table

  • EVMC / EVM vs subcarrier

  • PERRor / Phase error

  • IQ / I/Q constellation diagram

  • TXM / TX meas. statistical overview

  • ACLR / Adj. channel leakage power ratio

  • PMONitor / Power monitor

  • PDYNamics / Power dynamics

For reset values, see method RsCMPX_LteMeas.Configure.LteMeas.MultiEval.Result.all.

param enable:

OFF: Do not evaluate the results. ON: Evaluate the results.

Cloning the Group

# Create a clone of the original group, that exists independently
group2 = driver.configure.lteMeas.multiEval.result.evMagnitude.clone()

Subgroups