ChannelBw<ChannelBw>
RepCap Settings
# Range: Bw14 .. Bw200
rc = driver.configure.lteMeas.multiEval.limit.seMask.limit.channelBw.repcap_channelBw_get()
driver.configure.lteMeas.multiEval.limit.seMask.limit.channelBw.repcap_channelBw_set(repcap.ChannelBw.Bw14)
SCPI Command :
CONFigure:LTE:MEASurement<Instance>:MEValuation:LIMit:SEMask:LIMit<nr>:CBANdwidth<Band>
- class ChannelBwCls[source]
ChannelBw commands group definition. 1 total commands, 0 Subgroups, 1 group commands Repeated Capability: ChannelBw, default value after init: ChannelBw.Bw14
- class ChannelBwStruct[source]
Response structure. Fields:
Enable: bool: OFF: Disables the check of these requirements. ON: Enables the check of these requirements.
Frequency_Start: float: Lower border of the area, relative to the edges of the channel bandwidth.
Frequency_End: float: Upper border of the area, relative to the edges of the channel bandwidth.
Level: float: Upper limit for the area
Rbw: enums.Rbw: Resolution bandwidth to be used for the area. K030: 30 kHz K100: 100 kHz M1: 1 MHz
- get(limit=Limit.Default, channelBw=ChannelBw.Default) ChannelBwStruct [source]
# SCPI: CONFigure:LTE:MEASurement<Instance>:MEValuation:LIMit:SEMask:LIMit<nr>:CBANdwidth<Band> value: ChannelBwStruct = driver.configure.lteMeas.multiEval.limit.seMask.limit.channelBw.get(limit = repcap.Limit.Default, channelBw = repcap.ChannelBw.Default)
Defines general requirements for the emission mask area <no>. The activation state, the area borders, an upper limit and the resolution bandwidth must be specified. The emission mask applies to the channel bandwidth <Band>.
- param limit:
optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Limit’)
- param channelBw:
optional repeated capability selector. Default value: Bw14 (settable in the interface ‘ChannelBw’)
- return:
structure: for return value, see the help for ChannelBwStruct structure arguments.
- set(enable: bool, frequency_start: float, frequency_end: float, level: float, rbw: Rbw, limit=Limit.Default, channelBw=ChannelBw.Default) None [source]
# SCPI: CONFigure:LTE:MEASurement<Instance>:MEValuation:LIMit:SEMask:LIMit<nr>:CBANdwidth<Band> driver.configure.lteMeas.multiEval.limit.seMask.limit.channelBw.set(enable = False, frequency_start = 1.0, frequency_end = 1.0, level = 1.0, rbw = enums.Rbw.K030, limit = repcap.Limit.Default, channelBw = repcap.ChannelBw.Default)
Defines general requirements for the emission mask area <no>. The activation state, the area borders, an upper limit and the resolution bandwidth must be specified. The emission mask applies to the channel bandwidth <Band>.
- param enable:
OFF: Disables the check of these requirements. ON: Enables the check of these requirements.
- param frequency_start:
Lower border of the area, relative to the edges of the channel bandwidth.
- param frequency_end:
Upper border of the area, relative to the edges of the channel bandwidth.
- param level:
Upper limit for the area
- param rbw:
Resolution bandwidth to be used for the area. K030: 30 kHz K100: 100 kHz M1: 1 MHz
- param limit:
optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Limit’)
- param channelBw:
optional repeated capability selector. Default value: Bw14 (settable in the interface ‘ChannelBw’)
Cloning the Group
# Create a clone of the original group, that exists independently
group2 = driver.configure.lteMeas.multiEval.limit.seMask.limit.channelBw.clone()