ChannelBw<ChannelBw>

RepCap Settings

# Range: Bw14 .. Bw200
rc = driver.configure.lteMeas.multiEval.limit.aclr.utra.channelBw.repcap_channelBw_get()
driver.configure.lteMeas.multiEval.limit.aclr.utra.channelBw.repcap_channelBw_set(repcap.ChannelBw.Bw14)

SCPI Command :

CONFigure:LTE:MEASurement<Instance>:MEValuation:LIMit:ACLR:UTRA<nr>:CBANdwidth<Band>

class ChannelBwCls[source]

ChannelBw commands group definition. 1 total commands, 0 Subgroups, 1 group commands Repeated Capability: ChannelBw, default value after init: ChannelBw.Bw14

class ChannelBwStruct[source]

Response structure. Fields:

Relative_Level: float or bool: No parameter help available
Absolute_Level: float or bool: No parameter help available

get(utraAdjChannel=UtraAdjChannel.Default, channelBw=ChannelBw.Default) → ChannelBwStruct[source]

# SCPI: CONFigure:LTE:MEASurement<Instance>:MEValuation:LIMit:ACLR:UTRA<nr>:CBANdwidth<Band>
value: ChannelBwStruct = driver.configure.lteMeas.multiEval.limit.aclr.utra.channelBw.get(utraAdjChannel = repcap.UtraAdjChannel.Default, channelBw = repcap.ChannelBw.Default)

Defines relative and absolute limits for the ACLR measured in the first or second adjacent UTRA channel, depending on <no>. The settings are defined separately for each channel bandwidth.

param utraAdjChannel:

optional repeated capability selector. Default value: Ch1 (settable in the interface ‘Utra’)

param channelBw:

optional repeated capability selector. Default value: Bw14 (settable in the interface ‘ChannelBw’)

return:

structure: for return value, see the help for ChannelBwStruct structure arguments.

set(relative_level: float, absolute_level: float, utraAdjChannel=UtraAdjChannel.Default, channelBw=ChannelBw.Default) → None[source]

# SCPI: CONFigure:LTE:MEASurement<Instance>:MEValuation:LIMit:ACLR:UTRA<nr>:CBANdwidth<Band>
driver.configure.lteMeas.multiEval.limit.aclr.utra.channelBw.set(relative_level = 1.0, absolute_level = 1.0, utraAdjChannel = repcap.UtraAdjChannel.Default, channelBw = repcap.ChannelBw.Default)

Defines relative and absolute limits for the ACLR measured in the first or second adjacent UTRA channel, depending on <no>. The settings are defined separately for each channel bandwidth.

param relative_level:

(float or boolean) No help available

param absolute_level:

(float or boolean) No help available

param utraAdjChannel:

optional repeated capability selector. Default value: Ch1 (settable in the interface ‘Utra’)

param channelBw:

optional repeated capability selector. Default value: Bw14 (settable in the interface ‘ChannelBw’)

Cloning the Group

# Create a clone of the original group, that exists independently
group2 = driver.configure.lteMeas.multiEval.limit.aclr.utra.channelBw.clone()