Extreme

SCPI Commands :

READ:LTE:MEASurement<Instance>:MEValuation:SEMask:EXTReme
FETCh:LTE:MEASurement<Instance>:MEValuation:SEMask:EXTReme
CALCulate:LTE:MEASurement<Instance>:MEValuation:SEMask:EXTReme
class ExtremeCls[source]

Extreme commands group definition. 3 total commands, 0 Subgroups, 3 group commands

class CalculateStruct[source]

Response structure. Fields:

  • 1 Reliability: int: ‘Reliability indicator’

  • 2 Out_Of_Tolerance: int: Out of tolerance result, i.e. the percentage of measurement intervals of the statistic count for spectrum emission measurements exceeding the specified spectrum emission mask limits.

  • 3 Obw: float or bool: Occupied bandwidth

  • 4 Tx_Power_Min: float or bool: Minimum total TX power in the slot

  • 5 Tx_Power_Max: float or bool: Maximum total TX power in the slot

class ResultData[source]

Response structure. Fields:

  • 1 Reliability: int: ‘Reliability indicator’

  • 2 Out_Of_Tolerance: int: Out of tolerance result, i.e. the percentage of measurement intervals of the statistic count for spectrum emission measurements exceeding the specified spectrum emission mask limits.

  • 3 Obw: float: Occupied bandwidth

  • 4 Tx_Power_Min: float: Minimum total TX power in the slot

  • 5 Tx_Power_Max: float: Maximum total TX power in the slot

calculate() → CalculateStruct[source]

CALCulate:LTE:MEASurement<Instance>:MEValuation:SEMask:EXTReme

Snippet: value: CalculateStruct = driver.lteMeas.multiEval.seMask.extreme.calculate()

Return the extreme single-value results of the spectrum emission measurement. The values described below are returned by FETCh and READ commands. A CALCulate command returns limit check results instead, one value for each result listed below.

return:

structure: for return value, see the help for CalculateStruct structure arguments.

fetch() → ResultData[source]

FETCh:LTE:MEASurement<Instance>:MEValuation:SEMask:EXTReme

Snippet: value: ResultData = driver.lteMeas.multiEval.seMask.extreme.fetch()

Return the extreme single-value results of the spectrum emission measurement. The values described below are returned by FETCh and READ commands. A CALCulate command returns limit check results instead, one value for each result listed below.

return:

structure: for return value, see the help for ResultData structure arguments.

read() → ResultData[source]

READ:LTE:MEASurement<Instance>:MEValuation:SEMask:EXTReme

Snippet: value: ResultData = driver.lteMeas.multiEval.seMask.extreme.read()

Return the extreme single-value results of the spectrum emission measurement. The values described below are returned by FETCh and READ commands. A CALCulate command returns limit check results instead, one value for each result listed below.

return:

structure: for return value, see the help for ResultData structure arguments.