Average

SCPI Commands :

READ:LTE:MEASurement<Instance>:MEValuation:SEMask:AVERage
FETCh:LTE:MEASurement<Instance>:MEValuation:SEMask:AVERage
CALCulate:LTE:MEASurement<Instance>:MEValuation:SEMask:AVERage
class AverageCls[source]

Average commands group definition. 3 total commands, 0 Subgroups, 3 group commands

class CalculateStruct[source]

Response structure. Fields:

  • 1 Reliability: int: ‘Reliability indicator’

  • 2 Out_Of_Tolerance: int: Out of tolerance result, i.e. the percentage of measurement intervals of the statistic count for spectrum emission measurements exceeding the specified spectrum emission mask limits.

  • 3 Obw: float or bool: Occupied bandwidth

  • 4 Tx_Power: float or bool: Total TX power in the slot over all component carriers

class ResultData[source]

Response structure. Fields:

  • 1 Reliability: int: ‘Reliability indicator’

  • 2 Out_Of_Tolerance: int: Out of tolerance result, i.e. the percentage of measurement intervals of the statistic count for spectrum emission measurements exceeding the specified spectrum emission mask limits.

  • 3 Obw: float: Occupied bandwidth

  • 4 Tx_Power: float: Total TX power in the slot over all component carriers

calculate() → CalculateStruct[source]

CALCulate:LTE:MEASurement<Instance>:MEValuation:SEMask:AVERage

Snippet: value: CalculateStruct = driver.lteMeas.multiEval.seMask.average.calculate()

Return the current, average and standard deviation single-value results of the spectrum emission measurement. The values described below are returned by FETCh and READ commands. A CALCulate command returns limit check results instead, one value for each result listed below.

return:

structure: for return value, see the help for CalculateStruct structure arguments.

fetch() → ResultData[source]

FETCh:LTE:MEASurement<Instance>:MEValuation:SEMask:AVERage

Snippet: value: ResultData = driver.lteMeas.multiEval.seMask.average.fetch()

Return the current, average and standard deviation single-value results of the spectrum emission measurement. The values described below are returned by FETCh and READ commands. A CALCulate command returns limit check results instead, one value for each result listed below.

return:

structure: for return value, see the help for ResultData structure arguments.

read() → ResultData[source]

READ:LTE:MEASurement<Instance>:MEValuation:SEMask:AVERage

Snippet: value: ResultData = driver.lteMeas.multiEval.seMask.average.read()

Return the current, average and standard deviation single-value results of the spectrum emission measurement. The values described below are returned by FETCh and READ commands. A CALCulate command returns limit check results instead, one value for each result listed below.

return:

structure: for return value, see the help for ResultData structure arguments.