Srs

SCPI Commands :

INITiate:LTE:MEASurement<Instance>:SRS
STOP:LTE:MEASurement<Instance>:SRS
ABORt:LTE:MEASurement<Instance>:SRS

class SrsCls

Srs commands group definition. 26 total commands, 3 Subgroups, 3 group commands

abort(opc_timeout_ms: int = -1) → None

ABORt:LTE:MEASurement<Instance>:SRS

Snippet: driver.lteMeas.srs.abort()

INTRO_CMD_HELP: Starts, stops or aborts the measurement:

• The INITiate:… command starts or restarts the measurement. The measurement enters the RUN state.

• The STOP:… command halts the measurement immediately. The measurement enters the RDY state. Measurement results are kept. The resources remain allocated to the measurement.

• The ABORt:… command halts the measurement immediately. The measurement enters the OFF state. All measurement values are set to NAV. Allocated resources are released.

To query the current measurement state, use FETCh…STATe?.

param opc_timeout_ms:

Maximum time to wait in milliseconds, valid only for this call.

initiate(opc_timeout_ms: int = -1) → None

INITiate:LTE:MEASurement<Instance>:SRS

Snippet: driver.lteMeas.srs.initiate()

INTRO_CMD_HELP: Starts, stops or aborts the measurement:

• The INITiate:… command starts or restarts the measurement. The measurement enters the RUN state.

• The STOP:… command halts the measurement immediately. The measurement enters the RDY state. Measurement results are kept. The resources remain allocated to the measurement.

• The ABORt:… command halts the measurement immediately. The measurement enters the OFF state. All measurement values are set to NAV. Allocated resources are released.

To query the current measurement state, use FETCh…STATe?.

param opc_timeout_ms:

Maximum time to wait in milliseconds, valid only for this call.

stop() → None

STOP:LTE:MEASurement<Instance>:SRS

Snippet: driver.lteMeas.srs.stop()

INTRO_CMD_HELP: Starts, stops or aborts the measurement:

• The INITiate:… command starts or restarts the measurement. The measurement enters the RUN state.

• The STOP:… command halts the measurement immediately. The measurement enters the RDY state. Measurement results are kept. The resources remain allocated to the measurement.

• The ABORt:… command halts the measurement immediately. The measurement enters the OFF state. All measurement values are set to NAV. Allocated resources are released.

To query the current measurement state, use FETCh…STATe?.

stop_with_opc(opc_timeout_ms: int = -1) → None

STOP:LTE:MEASurement<Instance>:SRS

Snippet: driver.lteMeas.srs.stop_with_opc()

INTRO_CMD_HELP: Starts, stops or aborts the measurement:

• The INITiate:… command starts or restarts the measurement. The measurement enters the RUN state.

• The STOP:… command halts the measurement immediately. The measurement enters the RDY state. Measurement results are kept. The resources remain allocated to the measurement.

• The ABORt:… command halts the measurement immediately. The measurement enters the OFF state. All measurement values are set to NAV. Allocated resources are released.

To query the current measurement state, use FETCh…STATe?.

Same as stop, but waits for the operation to complete before continuing further. Use the RsCMPX_LteMeas.utilities.opc_timeout_set() to set the timeout value.

param opc_timeout_ms:

Maximum time to wait in milliseconds, valid only for this call.

Cloning the Group

# Create a clone of the original group, that exists independently
group2 = driver.lteMeas.srs.clone()

Subgroups

• Pdynamics
  • Average
  • Current
  • Maximum
  • Minimum
  • StandardDev
• State
  • All
• Trace
  • Pdynamics
    • Average
    • Current
    • Maximum