ChannelBw2nd<SecondChannelBw>
RepCap Settings
# Range: Bw50 .. Bw200
rc = driver.configure.lteMeas.multiEval.limit.aclr.eutra.carrierAggregation.channelBw1st.channelBw2nd.repcap_secondChannelBw_get()
driver.configure.lteMeas.multiEval.limit.aclr.eutra.carrierAggregation.channelBw1st.channelBw2nd.repcap_secondChannelBw_set(repcap.SecondChannelBw.Bw50)
SCPI Command :
CONFigure:LTE:MEASurement<Instance>:MEValuation:LIMit:ACLR:EUTRa:CAGGregation:CBANdwidth<Band1>:CBANdwidth<Band2>
- class ChannelBw2ndCls[source]
ChannelBw2nd commands group definition. 2 total commands, 1 Subgroups, 1 group commands Repeated Capability: SecondChannelBw, default value after init: SecondChannelBw.Bw50
- class ChannelBw2ndStruct[source]
Response structure. Fields:
Relative_Level: float or bool: No parameter help available
Absolute_Level: float or bool: No parameter help available
- get(firstChannelBw=FirstChannelBw.Default, secondChannelBw=SecondChannelBw.Default) ChannelBw2ndStruct [source]
# SCPI: CONFigure:LTE:MEASurement<Instance>:MEValuation:LIMit:ACLR:EUTRa:CAGGregation:CBANdwidth<Band1>:CBANdwidth<Band2> value: ChannelBw2ndStruct = driver.configure.lteMeas.multiEval.limit.aclr.eutra.carrierAggregation.channelBw1st.channelBw2nd.get(firstChannelBw = repcap.FirstChannelBw.Default, secondChannelBw = repcap.SecondChannelBw.Default)
Defines relative and absolute limits for the ACLR measured in an adjacent E-UTRA channel. The settings are defined separately for each channel bandwidth combination, for two aggregated carriers. The following bandwidth combinations are supported: Example: For the first line in the figure, use …:CBANdwidth100:CBANdwidth50.
- param firstChannelBw:
optional repeated capability selector. Default value: Bw100 (settable in the interface ‘ChannelBw1st’)
- param secondChannelBw:
optional repeated capability selector. Default value: Bw50 (settable in the interface ‘ChannelBw2nd’)
- return:
structure: for return value, see the help for ChannelBw2ndStruct structure arguments.
- set(relative_level: float, absolute_level: float, firstChannelBw=FirstChannelBw.Default, secondChannelBw=SecondChannelBw.Default) None [source]
# SCPI: CONFigure:LTE:MEASurement<Instance>:MEValuation:LIMit:ACLR:EUTRa:CAGGregation:CBANdwidth<Band1>:CBANdwidth<Band2> driver.configure.lteMeas.multiEval.limit.aclr.eutra.carrierAggregation.channelBw1st.channelBw2nd.set(relative_level = 1.0, absolute_level = 1.0, firstChannelBw = repcap.FirstChannelBw.Default, secondChannelBw = repcap.SecondChannelBw.Default)
Defines relative and absolute limits for the ACLR measured in an adjacent E-UTRA channel. The settings are defined separately for each channel bandwidth combination, for two aggregated carriers. The following bandwidth combinations are supported: Example: For the first line in the figure, use …:CBANdwidth100:CBANdwidth50.
- param relative_level:
(float or boolean) No help available
- param absolute_level:
(float or boolean) No help available
- param firstChannelBw:
optional repeated capability selector. Default value: Bw100 (settable in the interface ‘ChannelBw1st’)
- param secondChannelBw:
optional repeated capability selector. Default value: Bw50 (settable in the interface ‘ChannelBw2nd’)
Cloning the Group
# Create a clone of the original group, that exists independently
group2 = driver.configure.lteMeas.multiEval.limit.aclr.eutra.carrierAggregation.channelBw1st.channelBw2nd.clone()
Subgroups