Current
SCPI Commands :
READ:LTE:MEASurement<Instance>:PRACh:MODulation:CURRent
FETCh:LTE:MEASurement<Instance>:PRACh:MODulation:CURRent
CALCulate:LTE:MEASurement<Instance>:PRACh:MODulation:CURRent
- class CurrentCls[source]
Current commands group definition. 3 total commands, 0 Subgroups, 3 group commands
- class CalculateStruct[source]
Response structure. Fields:
Reliability: int: ‘Reliability indicator’
Out_Of_Tolerance: int: Out of tolerance result, i.e. the percentage of measurement intervals of the statistic count for modulation measurements exceeding the specified modulation limits.
Evm_Rms_Low: float or bool: EVM RMS value, low EVM window position.
Evm_Rms_High: float or bool: EVM RMS value, high EVM window position.
Evm_Peak_Low: float or bool: EVM peak value, low EVM window position.
Evm_Peak_High: float or bool: EVM peak value, high EVM window position.
Mag_Error_Rms_Low: float or bool: Magnitude error RMS value, low EVM window position.
Mag_Error_Rms_High: float or bool: Magnitude error RMS value, low EVM window position.
Mag_Error_Peak_Low: float or bool: Magnitude error peak value, low EVM window position.
Mag_Err_Peak_High: float or bool: Magnitude error peak value, high EVM window position.
Ph_Error_Rms_Low: float or bool: Phase error RMS value, low EVM window position.
Ph_Error_Rms_High: float or bool: Phase error RMS value, high EVM window position.
Ph_Error_Peak_Low: float or bool: Phase error peak value, low EVM window position.
Ph_Error_Peak_High: float or bool: Phase error peak value, high EVM window position.
Frequency_Error: float or bool: Carrier frequency error.
Timing_Error: float or bool: Transmit time error.
Tx_Power: float or bool: UE RMS power.
Peak_Power: float or bool: UE peak power.
- class ResultData[source]
Response structure. Fields:
Reliability: int: ‘Reliability indicator’
Out_Of_Tolerance: int: Out of tolerance result, i.e. the percentage of measurement intervals of the statistic count for modulation measurements exceeding the specified modulation limits.
Evm_Rms_Low: float: EVM RMS value, low EVM window position.
Evm_Rms_High: float: EVM RMS value, high EVM window position.
Evm_Peak_Low: float: EVM peak value, low EVM window position.
Evm_Peak_High: float: EVM peak value, high EVM window position.
Mag_Error_Rms_Low: float: Magnitude error RMS value, low EVM window position.
Mag_Error_Rms_High: float: Magnitude error RMS value, low EVM window position.
Mag_Error_Peak_Low: float: Magnitude error peak value, low EVM window position.
Mag_Err_Peak_High: float: Magnitude error peak value, high EVM window position.
Ph_Error_Rms_Low: float: Phase error RMS value, low EVM window position.
Ph_Error_Rms_High: float: Phase error RMS value, high EVM window position.
Ph_Error_Peak_Low: float: Phase error peak value, low EVM window position.
Ph_Error_Peak_High: float: Phase error peak value, high EVM window position.
Frequency_Error: float: Carrier frequency error.
Timing_Error: float: Transmit time error.
Tx_Power: float: UE RMS power.
Peak_Power: float: UE peak power.
- calculate() CalculateStruct [source]
# SCPI: CALCulate:LTE:MEASurement<Instance>:PRACh:MODulation:CURRent value: CalculateStruct = driver.lteMeas.prach.modulation.current.calculate()
Return the current, average and standard deviation single-value results. The values described below are returned by FETCh and READ commands. CALCulate commands return limit check results instead, one value for each result listed below.
- return:
structure: for return value, see the help for CalculateStruct structure arguments.
- fetch() ResultData [source]
# SCPI: FETCh:LTE:MEASurement<Instance>:PRACh:MODulation:CURRent value: ResultData = driver.lteMeas.prach.modulation.current.fetch()
Return the current, average and standard deviation single-value results. The values described below are returned by FETCh and READ commands. CALCulate commands return limit check results instead, one value for each result listed below.
- return:
structure: for return value, see the help for ResultData structure arguments.
- read() ResultData [source]
# SCPI: READ:LTE:MEASurement<Instance>:PRACh:MODulation:CURRent value: ResultData = driver.lteMeas.prach.modulation.current.read()
Return the current, average and standard deviation single-value results. The values described below are returned by FETCh and READ commands. CALCulate commands return limit check results instead, one value for each result listed below.
- return:
structure: for return value, see the help for ResultData structure arguments.