Average

SCPI Commands :

READ:LTE:MEASurement<Instance>:PRACh:MODulation:AVERage
FETCh:LTE:MEASurement<Instance>:PRACh:MODulation:AVERage
CALCulate:LTE:MEASurement<Instance>:PRACh:MODulation:AVERage
class AverageCls[source]

Average commands group definition. 3 total commands, 0 Subgroups, 3 group commands

class CalculateStruct[source]

Response structure. Fields:

  • 1 Reliability: int: ‘Reliability indicator’

  • 2 Out_Of_Tolerance: int: Out of tolerance result, i.e. the percentage of measurement intervals of the statistic count for modulation measurements exceeding the specified modulation limits.

  • 3 Evm_Rms_Low: float or bool: EVM RMS value, low EVM window position.

  • 4 Evm_Rms_High: float or bool: EVM RMS value, high EVM window position.

  • 5 Evm_Peak_Low: float or bool: EVM peak value, low EVM window position.

  • 6 Evm_Peak_High: float or bool: EVM peak value, high EVM window position.

  • 7 Mag_Error_Rms_Low: float or bool: Magnitude error RMS value, low EVM window position.

  • 8 Mag_Error_Rms_High: float or bool: Magnitude error RMS value, low EVM window position.

  • 9 Mag_Error_Peak_Low: float or bool: Magnitude error peak value, low EVM window position.

  • 10 Mag_Err_Peak_High: float or bool: Magnitude error peak value, high EVM window position.

  • 11 Ph_Error_Rms_Low: float or bool: Phase error RMS value, low EVM window position.

  • 12 Ph_Error_Rms_High: float or bool: Phase error RMS value, high EVM window position.

  • 13 Ph_Error_Peak_Low: float or bool: Phase error peak value, low EVM window position.

  • 14 Ph_Error_Peak_High: float or bool: Phase error peak value, high EVM window position.

  • 15 Frequency_Error: float or bool: Carrier frequency error.

  • 16 Timing_Error: float or bool: Transmit time error.

  • 17 Tx_Power: float or bool: UE RMS power.

  • 18 Peak_Power: float or bool: UE peak power.

class ResultData[source]

Response structure. Fields:

  • 1 Reliability: int: ‘Reliability indicator’

  • 2 Out_Of_Tolerance: int: Out of tolerance result, i.e. the percentage of measurement intervals of the statistic count for modulation measurements exceeding the specified modulation limits.

  • 3 Evm_Rms_Low: float: EVM RMS value, low EVM window position.

  • 4 Evm_Rms_High: float: EVM RMS value, high EVM window position.

  • 5 Evm_Peak_Low: float: EVM peak value, low EVM window position.

  • 6 Evm_Peak_High: float: EVM peak value, high EVM window position.

  • 7 Mag_Error_Rms_Low: float: Magnitude error RMS value, low EVM window position.

  • 8 Mag_Error_Rms_High: float: Magnitude error RMS value, low EVM window position.

  • 9 Mag_Error_Peak_Low: float: Magnitude error peak value, low EVM window position.

  • 10 Mag_Err_Peak_High: float: Magnitude error peak value, high EVM window position.

  • 11 Ph_Error_Rms_Low: float: Phase error RMS value, low EVM window position.

  • 12 Ph_Error_Rms_High: float: Phase error RMS value, high EVM window position.

  • 13 Ph_Error_Peak_Low: float: Phase error peak value, low EVM window position.

  • 14 Ph_Error_Peak_High: float: Phase error peak value, high EVM window position.

  • 15 Frequency_Error: float: Carrier frequency error.

  • 16 Timing_Error: float: Transmit time error.

  • 17 Tx_Power: float: UE RMS power.

  • 18 Peak_Power: float: UE peak power.

calculate() → CalculateStruct[source]

CALCulate:LTE:MEASurement<Instance>:PRACh:MODulation:AVERage

Snippet: value: CalculateStruct = driver.lteMeas.prach.modulation.average.calculate()

Return the current, average and standard deviation single-value results. The values described below are returned by FETCh and READ commands. A CALCulate command returns limit check results instead, one value for each result listed below.

return:

structure: for return value, see the help for CalculateStruct structure arguments.

fetch() → ResultData[source]

FETCh:LTE:MEASurement<Instance>:PRACh:MODulation:AVERage

Snippet: value: ResultData = driver.lteMeas.prach.modulation.average.fetch()

Return the current, average and standard deviation single-value results. The values described below are returned by FETCh and READ commands. A CALCulate command returns limit check results instead, one value for each result listed below.

return:

structure: for return value, see the help for ResultData structure arguments.

read() → ResultData[source]

READ:LTE:MEASurement<Instance>:PRACh:MODulation:AVERage

Snippet: value: ResultData = driver.lteMeas.prach.modulation.average.read()

Return the current, average and standard deviation single-value results. The values described below are returned by FETCh and READ commands. A CALCulate command returns limit check results instead, one value for each result listed below.

return:

structure: for return value, see the help for ResultData structure arguments.