Maximum
SCPI Commands :
READ:LTE:MEASurement<Instance>:MEValuation:PDYNamics:MAXimum
FETCh:LTE:MEASurement<Instance>:MEValuation:PDYNamics:MAXimum
CALCulate:LTE:MEASurement<Instance>:MEValuation:PDYNamics:MAXimum
- class MaximumCls[source]
Maximum commands group definition. 3 total commands, 0 Subgroups, 3 group commands
- class CalculateStruct[source]
Response structure. Fields:
Reliability: int: ‘Reliability indicator’
Out_Of_Tolerance: int: Out of tolerance result, i.e. the percentage of measurement intervals of the statistic count for power measurements exceeding the specified power limits.
Off_Power_Before: float or bool: No parameter help available
On_Power_Rms: float or bool: No parameter help available
On_Power_Peak: float or bool: No parameter help available
Off_Power_After: float or bool: No parameter help available
- class ResultData[source]
Response structure. Fields:
Reliability: int: ‘Reliability indicator’
Out_Of_Tolerance: int: Out of tolerance result, i.e. the percentage of measurement intervals of the statistic count for power measurements exceeding the specified power limits.
Off_Power_Before: float: No parameter help available
On_Power_Rms: float: No parameter help available
On_Power_Peak: float: No parameter help available
Off_Power_After: float: No parameter help available
- calculate() CalculateStruct [source]
# SCPI: CALCulate:LTE:MEASurement<Instance>:MEValuation:PDYNamics:MAXimum value: CalculateStruct = driver.lteMeas.multiEval.pdynamics.maximum.calculate()
Return the current, average, minimum, maximum and standard deviation single-value results of the power dynamics measurement. A single result table row is returned, from left to right. The meaning of the values depends on the selected time mask, as follows:
Table Header: Time mask / <Power1> / <Power2> / <Power3> / <Power4>
General on / off / OFF power (before) / ON power RMS / ON power peak / OFF power (after)
PUCCH / PUSCH / SRS / SRS ON / ON power RMS / ON power peak / ON power (after)
SRS blanking / SRS OFF / ON power RMS / ON power peak / ON power (after)
The values described below are returned by FETCh and READ commands. CALCulate commands return limit check results instead, one value for each result listed below.
- return:
structure: for return value, see the help for CalculateStruct structure arguments.
- fetch() ResultData [source]
# SCPI: FETCh:LTE:MEASurement<Instance>:MEValuation:PDYNamics:MAXimum value: ResultData = driver.lteMeas.multiEval.pdynamics.maximum.fetch()
Return the current, average, minimum, maximum and standard deviation single-value results of the power dynamics measurement. A single result table row is returned, from left to right. The meaning of the values depends on the selected time mask, as follows:
Table Header: Time mask / <Power1> / <Power2> / <Power3> / <Power4>
General on / off / OFF power (before) / ON power RMS / ON power peak / OFF power (after)
PUCCH / PUSCH / SRS / SRS ON / ON power RMS / ON power peak / ON power (after)
SRS blanking / SRS OFF / ON power RMS / ON power peak / ON power (after)
The values described below are returned by FETCh and READ commands. CALCulate commands return limit check results instead, one value for each result listed below.
- return:
structure: for return value, see the help for ResultData structure arguments.
- read() ResultData [source]
# SCPI: READ:LTE:MEASurement<Instance>:MEValuation:PDYNamics:MAXimum value: ResultData = driver.lteMeas.multiEval.pdynamics.maximum.read()
Return the current, average, minimum, maximum and standard deviation single-value results of the power dynamics measurement. A single result table row is returned, from left to right. The meaning of the values depends on the selected time mask, as follows:
Table Header: Time mask / <Power1> / <Power2> / <Power3> / <Power4>
General on / off / OFF power (before) / ON power RMS / ON power peak / OFF power (after)
PUCCH / PUSCH / SRS / SRS ON / ON power RMS / ON power peak / ON power (after)
SRS blanking / SRS OFF / ON power RMS / ON power peak / ON power (after)
The values described below are returned by FETCh and READ commands. CALCulate commands return limit check results instead, one value for each result listed below.
- return:
structure: for return value, see the help for ResultData structure arguments.