Average

SCPI Commands :

READ:LTE:MEASurement<Instance>:MEValuation:PDYNamics:AVERage
FETCh:LTE:MEASurement<Instance>:MEValuation:PDYNamics:AVERage
CALCulate:LTE:MEASurement<Instance>:MEValuation:PDYNamics:AVERage
class AverageCls[source]

Average commands group definition. 3 total commands, 0 Subgroups, 3 group commands

class CalculateStruct[source]

Response structure. Fields:

  • Reliability: int: ‘Reliability indicator’

  • Out_Of_Tolerance: int: Out of tolerance result, i.e. the percentage of measurement intervals of the statistic count for power measurements exceeding the specified power limits.

  • Off_Power_Before: float or bool: No parameter help available

  • On_Power_Rms: float or bool: No parameter help available

  • On_Power_Peak: float or bool: No parameter help available

  • Off_Power_After: float or bool: No parameter help available

class ResultData[source]

Response structure. Fields:

  • Reliability: int: ‘Reliability indicator’

  • Out_Of_Tolerance: int: Out of tolerance result, i.e. the percentage of measurement intervals of the statistic count for power measurements exceeding the specified power limits.

  • Off_Power_Before: float: No parameter help available

  • On_Power_Rms: float: No parameter help available

  • On_Power_Peak: float: No parameter help available

  • Off_Power_After: float: No parameter help available

calculate() → CalculateStruct[source]
# SCPI: CALCulate:LTE:MEASurement<Instance>:MEValuation:PDYNamics:AVERage
value: CalculateStruct = driver.lteMeas.multiEval.pdynamics.average.calculate()

Return the current, average, minimum, maximum and standard deviation single-value results of the power dynamics measurement. A single result table row is returned, from left to right. The meaning of the values depends on the selected time mask, as follows:

Table Header: Time mask / <Power1> / <Power2> / <Power3> / <Power4>

  • General on / off / OFF power (before) / ON power RMS / ON power peak / OFF power (after)

  • PUCCH / PUSCH / SRS / SRS ON / ON power RMS / ON power peak / ON power (after)

  • SRS blanking / SRS OFF / ON power RMS / ON power peak / ON power (after)

The values described below are returned by FETCh and READ commands. CALCulate commands return limit check results instead, one value for each result listed below.

return:

structure: for return value, see the help for CalculateStruct structure arguments.

fetch() → ResultData[source]
# SCPI: FETCh:LTE:MEASurement<Instance>:MEValuation:PDYNamics:AVERage
value: ResultData = driver.lteMeas.multiEval.pdynamics.average.fetch()

Return the current, average, minimum, maximum and standard deviation single-value results of the power dynamics measurement. A single result table row is returned, from left to right. The meaning of the values depends on the selected time mask, as follows:

Table Header: Time mask / <Power1> / <Power2> / <Power3> / <Power4>

  • General on / off / OFF power (before) / ON power RMS / ON power peak / OFF power (after)

  • PUCCH / PUSCH / SRS / SRS ON / ON power RMS / ON power peak / ON power (after)

  • SRS blanking / SRS OFF / ON power RMS / ON power peak / ON power (after)

The values described below are returned by FETCh and READ commands. CALCulate commands return limit check results instead, one value for each result listed below.

return:

structure: for return value, see the help for ResultData structure arguments.

read() → ResultData[source]
# SCPI: READ:LTE:MEASurement<Instance>:MEValuation:PDYNamics:AVERage
value: ResultData = driver.lteMeas.multiEval.pdynamics.average.read()

Return the current, average, minimum, maximum and standard deviation single-value results of the power dynamics measurement. A single result table row is returned, from left to right. The meaning of the values depends on the selected time mask, as follows:

Table Header: Time mask / <Power1> / <Power2> / <Power3> / <Power4>

  • General on / off / OFF power (before) / ON power RMS / ON power peak / OFF power (after)

  • PUCCH / PUSCH / SRS / SRS ON / ON power RMS / ON power peak / ON power (after)

  • SRS blanking / SRS OFF / ON power RMS / ON power peak / ON power (after)

The values described below are returned by FETCh and READ commands. CALCulate commands return limit check results instead, one value for each result listed below.

return:

structure: for return value, see the help for ResultData structure arguments.