Extreme

SCPI Commands :

READ:LTE:MEASurement<Instance>:MEValuation:MODulation:EXTReme
FETCh:LTE:MEASurement<Instance>:MEValuation:MODulation:EXTReme
CALCulate:LTE:MEASurement<Instance>:MEValuation:MODulation:EXTReme

class ExtremeCls[source]

Extreme commands group definition. 3 total commands, 0 Subgroups, 3 group commands

class CalculateStruct[source]

Response structure. Fields:

Out_Of_Tolerance: int: Out of tolerance result, i.e. the percentage of measurement intervals of the statistic count for modulation measurements exceeding the specified modulation limits.
Evm_Rms_Low: float or bool: EVM RMS value, low EVM window position
Evm_Rms_High: float or bool: EVM RMS value, high EVM window position
Evm_Peak_Low: float or bool: EVM peak value, low EVM window position
Evm_Peak_High: float or bool: EVM peak value, high EVM window position
Mag_Error_Rms_Low: float or bool: Magnitude error RMS value, low EVM window position
Mag_Error_Rms_High: float or bool: Magnitude error RMS value, low EVM window position
Mag_Error_Peak_Low: float or bool: Magnitude error peak value, low EVM window position
Mag_Err_Peak_High: float or bool: Magnitude error peak value, high EVM window position
Ph_Error_Rms_Low: float or bool: Phase error RMS value, low EVM window position
Ph_Error_Rms_High: float or bool: Phase error RMS value, high EVM window position
Ph_Error_Peak_Low: float or bool: Phase error peak value, low EVM window position
Ph_Error_Peak_High: float or bool: Phase error peak value, high EVM window position
Iq_Offset: float or bool: I/Q origin offset
Frequency_Error: float or bool: Carrier frequency error
Timing_Error: float or bool: Time error
Tx_Power_Minimum: float or bool: Minimum user equipment power
Tx_Power_Maximum: float or bool: Maximum user equipment power
Peak_Power_Min: float or bool: Minimum user equipment peak power
Peak_Power_Max: float or bool: Maximum user equipment peak power
Psd_Minimum: float or bool: No parameter help available
Psd_Maximum: float or bool: No parameter help available
Evm_Dmrs_Low: float or bool: EVM DMRS value, low EVM window position
Evm_Dmrs_High: float or bool: EVM DMRS value, high EVM window position
Mag_Err_Dmrs_Low: float or bool: Magnitude error DMRS value, low EVM window position
Mag_Err_Dmrs_High: float or bool: Magnitude error DMRS value, high EVM window position
Ph_Error_Dmrs_Low: float or bool: Phase error DMRS value, low EVM window position
Ph_Error_Dmrs_High: float or bool: Phase error DMRS value, high EVM window position
Iq_Gain_Imbalance: float or bool: Gain imbalance
Iq_Quadrature_Err: float or bool: Quadrature error
Evm_Srs: float: Error vector magnitude for SRS signals

class ResultData[source]

Response structure. Fields:

Out_Of_Tolerance: int: Out of tolerance result, i.e. the percentage of measurement intervals of the statistic count for modulation measurements exceeding the specified modulation limits.
Evm_Rms_Low: float: EVM RMS value, low EVM window position
Evm_Rms_High: float: EVM RMS value, high EVM window position
Evm_Peak_Low: float: EVM peak value, low EVM window position
Evm_Peak_High: float: EVM peak value, high EVM window position
Mag_Error_Rms_Low: float: Magnitude error RMS value, low EVM window position
Mag_Error_Rms_High: float: Magnitude error RMS value, low EVM window position
Mag_Error_Peak_Low: float: Magnitude error peak value, low EVM window position
Mag_Err_Peak_High: float: Magnitude error peak value, high EVM window position
Ph_Error_Rms_Low: float: Phase error RMS value, low EVM window position
Ph_Error_Rms_High: float: Phase error RMS value, high EVM window position
Ph_Error_Peak_Low: float: Phase error peak value, low EVM window position
Ph_Error_Peak_High: float: Phase error peak value, high EVM window position
Iq_Offset: float: I/Q origin offset
Frequency_Error: float: Carrier frequency error
Timing_Error: float: Time error
Tx_Power_Minimum: float: Minimum user equipment power
Tx_Power_Maximum: float: Maximum user equipment power
Peak_Power_Min: float: Minimum user equipment peak power
Peak_Power_Max: float: Maximum user equipment peak power
Psd_Minimum: float: No parameter help available
Psd_Maximum: float: No parameter help available
Evm_Dmrs_Low: float: EVM DMRS value, low EVM window position
Evm_Dmrs_High: float: EVM DMRS value, high EVM window position
Mag_Err_Dmrs_Low: float: Magnitude error DMRS value, low EVM window position
Mag_Err_Dmrs_High: float: Magnitude error DMRS value, high EVM window position
Ph_Error_Dmrs_Low: float: Phase error DMRS value, low EVM window position
Ph_Error_Dmrs_High: float: Phase error DMRS value, high EVM window position
Iq_Gain_Imbalance: float: Gain imbalance
Iq_Quadrature_Err: float: Quadrature error
Evm_Srs: float: Error vector magnitude for SRS signals

calculate() → CalculateStruct[source]

# SCPI: CALCulate:LTE:MEASurement<Instance>:MEValuation:MODulation:EXTReme
value: CalculateStruct = driver.lteMeas.multiEval.modulation.extreme.calculate()

Return the extreme single value results. The values described below are returned by FETCh and READ commands. CALCulate commands return limit check results instead, one value for each result listed below.

Suppressed linked return values: reliability

return:

structure: for return value, see the help for CalculateStruct structure arguments.

fetch() → ResultData[source]

# SCPI: FETCh:LTE:MEASurement<Instance>:MEValuation:MODulation:EXTReme
value: ResultData = driver.lteMeas.multiEval.modulation.extreme.fetch()

Return the extreme single value results. The values described below are returned by FETCh and READ commands. CALCulate commands return limit check results instead, one value for each result listed below.

Suppressed linked return values: reliability

return:

structure: for return value, see the help for ResultData structure arguments.

read() → ResultData[source]

# SCPI: READ:LTE:MEASurement<Instance>:MEValuation:MODulation:EXTReme
value: ResultData = driver.lteMeas.multiEval.modulation.extreme.read()

Return the extreme single value results. The values described below are returned by FETCh and READ commands. CALCulate commands return limit check results instead, one value for each result listed below.

Suppressed linked return values: reliability

return:

structure: for return value, see the help for ResultData structure arguments.